Storage And Handling; Removal Instruction - AMATECH I-LHLMFH Instrucciones De Uso

INSTRUCTIONS FOR USE
i. When properly used, the Legmatic legholder boots provide passive rest for the
leg, free of pressure points. Do not permit to anyone or anything to lean on the
patient's leg at any time.
j. Drape as required.
3.3 Device controls and indicators:
Controls and indicators of this device are described within the Setup instructions.
3.4 Storage, Handling and Removal Instructions:
3.4.1

Storage and Handling:

The product should be stored in a clean and safe environment to prevent product
damage. See storage Specifications under Product Specification section.
3.4.2

Removal Instruction:

a. Release the boot straps and take the patient's leg out of the device.
b. Loosen the locking Knob (knob 1).
c. Slide the Legmatic Legholder mount from square table mount bar.
3.5 Troubleshooting Guide:
This device does not have a troubleshooting guide. For technical support user of
the device shall first contact his or her supplier.
3.6 Device Maintenance:
Make sure that all labels are installed and can be read. Replace labels as
necessary by using a plastic scraper to remove the label. Use an alcohol wipe to
remove any adhesive residue.
Contact us if you need to repair or replace the device by using the information
from the contact details section (1.3).
Document Number: D-720453
Version: C
Page 13
Issue Date: 20 MAR 2020
Ref Blank Template: 80025118 Ver. E