Four State QRP Group 11009609 Manual Del Usuario Y De Instalación página 7

Adjusting the Monitors Position
The Dual Display monitor base allows you to customize your work area by allowing vertical height adjustment of both monitors.
You can also adjust the individual monitors for vertical and horizontal tilt and separation.
Vertical Height Adjustment for both Monitors
You can adjust the viewing height by up to 2 inches up or down on the base by loosening the thumb screw on the back of the
base and lifting or lowering the monitors. Make sure you tighten the thumb screw to secure the correct height.
Loosen the height adjustment thumb screw.
The monitor at their lowest elevation. The monitor at their highest elevation.
Horizontal Adjustment for both Monitors
You can adjust the distance between the monitors by loosening the thumb screw on each monitor and sliding the monitors
towards or away from each other and then secure them by tightening the thumb screw.
Adjusting the monitors for horizontal viewing.
View monitors side by side for single documents. You may separate monitors apart.
7