Menu Control Buttons - Four State QRP Group 11009609 Manual Del Usuario Y De Instalación

Menu Control Buttons

Press the "A" button to Auto-adjust the horizontal and vertical position to its optimal settings.
•
Press the "M" button to display the OSD menu.
•
Select the desired function menu, by pressing
•
"─"
Push the or "+" button to increase or decrease the value and change the setting.
•
• The OSD menu will close automatically after 15 seconds of inactivity.
NO INPUT SIGNAL
If this warning appears,
1. Check the signal connection between the computer and the LCD monitors.
2. Check the connection. If it is bent or damaged, the signal cable may be affected.
3. If the monitor is in "sleep" mode to save power, please move the mouse or press any key to "wake" it and return to
working mode.
4. Please check input diagrams, and make sure the monitor has been properly configured.
OUT OF RANGE
This warning indicates that the input signal frequency does not match those supported by these monitors. For this model,
horizontal frequency must be in the range of 31.46 ~ 80.00 KHz and vertical frequency in the range of 56.25~75.03 Hz.
Please make sure your input signal is within these ranges.
No. Symbol
1. Auto-adjust.
A 2. Move the selector highlight bar upward.
Note: This function only works in VGA mode.
1. Open the OSD (On Screen Display).
M
2. Move the selector highlight bar downward.
POWER 1. Turns the power on / off.
─ 1. Decrease the values of the function selected.
1. Increase the values of the selected function.
+
2. To switch the signal source from RGB – DVI.
"A"
Function
or the "M" button.
21