Technical Data; Defi Nitions: Safety Guidelines; Ec Declaration Of Conformity - DeWalt DW717 Traducido De Las Instrucciones Originales

E N G L I S H
MITRE SAW DW717, DW717XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product
E
development and innovation make D
partners for professional power tool users.

Technical Data

Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Blade bore
Blade body thickness
Max. blade speed
Max. cross-cut capacity 90°/90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 89 mm
Resulting height at max. width 320 mm
45° mitre left
Resulting width at max. height 89 mm
Resulting height at max. width 226 mm
45° bevel left
Resulting width at max. height 58 mm
Resulting height at max. width 320 mm
45° bevel right
Resulting width at max. height 30 mm
Resulting height at max. width 320 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 272 mm
Blade run-down time
Weight
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L ( sound power )
WA
K ( sound power uncertainty )
WA
Vibration total values (triax vector sum) determined according to EN 61029:
Vibration emission value a
h
a =
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for a
preliminary assessment of exposure.
WARNING: The declared vibration emission level represents
the main applications of the tool. However if the tool is used
for different applications, with different accessories or poorly
maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working
period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may
significantly reduce the exposure level over the total working
period.
28
WALT one of the most reliable
E
DW717/DW717XPS
V 230
V 230/115
3/4
W 1675
mm 250
mm 30
mm 2.2
-1
min 4000
mm 98 x 320
mm 226
mm 89
mm 56
left 60°
right 51°
left 48°
right 48°
mm 302
mm 76
mm 213
mm 76
mm 302
mm 50
mm 302
mm 22
mm 44
s < 10.0
kg 24
dB(A) 91
dB(A) 3.0
dB(A) 99
dB(A) 3.0
m/s² 2.1
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work
patterns.
Fuses:
Europe
U.K. & Ireland
U.K. & Ireland
NOTE: This device is intended for the connection to a power supply system
with maximum permissible system impedance Zmax of 0.27 Ohm at the
interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power system
which fulfils the requirement above. If necessary, the user can ask the public
power supply company for the system impedance at the interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if
not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if
not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
DW717, DW717XPS
D WALT declares that these products described under Technical Data are
E
in compliance with: 2006/42/EC, EN 61029-1; EN 61029-2-9.
These products also comply with Directive 2004/108/EC and
2011/65/EU. For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
01.11.2011
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
115 V tools 16 Amperes, mains
WALT at the following
E
WALT.
E