Disposal Of Packaging Materials; Set-Up Location Requirements - Kompernaß WK 8 B3 Instrucciones De Uso

NOTICE
► You will need the following additional parts for assembling
the wall bracket: pencil, drill, 6 mm masonry drill bit, Phillips
screwdriver

Disposal of packaging materials

The packaging materials have been selected for their
environmental friendliness and ease of disposal, and are
therefore recyclable. Dispose of packaging materials
which are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly
manner.
Note the labelling on the packaging and separate the
packaging material components for disposal if necessary.
The packaging material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites.

Set-up location requirements

This device complies with protection class IP54. This means that the
camera is protected from dust and water spray, and can be used
regardless of the weather conditions. However, proper protection
from dust and water spray is only provided if the camera is correctly
closed and all seals are intact and clean.
Please be aware that protection from dust and water spray will be
limited when used with an external mains adapter.
WK 8 B3
GB │ IE │ 15 ■