Ingun Pylon Manual Del Usuario página 15

English
5.2) Protective conductor connection
If a hazardous voltage (>25 VAC and >60 VDC) is used, the receiver may only be operated when
the protective conductor connection is connected with protective earth.
5.3) Installation of interface blocks
The component placement of the receiver with interface blocks must be coordinated with the test
system and test adapters to be used. All INGUN interface blocks can be installed in the receiver.
The receiver is always equipped with the interface blocks on the test system side. These include
the spring-loaded contact pins. The test adapters are equipped with the interface blocks on the
sample side. These include the rigid contact parts.
Receiver with interface blocks fully equipped with components
1) Interface block
2) Fastening screw
3) Mounting surface for interface blocks
©
INGUN, errors and technical changes reserved
Protective conductor connection to the receiver
14