EN
The recommended setting temperature of the heater for ensuring a comfortable
discharge water temperature is 50 to 60°C.
A
How to use
A-1
How to regulate the temperature
Model TBV02405/Model TBV02406
Turn the temperature regulating handle.
With the "40" mark as a guideline, set the safety button to match your
preferred temperature.
In order to turn on hot water over 40°C
turn the handle while pressing the safety button.
A-2
Turn on/off the cold (hot) water.
Press the open/close button.
The button will come out towards you and cold (hot) water will come out.
Press the open/close button once again.
The button will go back in and the cold (hot) water will stop.
B
Daily maintenance
B-1
Filter maintenance
Model TBV02405/Model TBV02406
1. Shut the stopcock.
2. Set the safety button of the temperature regulating handle to match the
"40" mark.
Set the open/close button to close.
3. Remove the temperature regulating handle.
Be careful not to turn the temperature regulating handle and remove
the cap and machine screws then remove the handle.
Use a precision screwdriver or the like with a fine point to remove the
cap, being careful not to scratch the galvanized surface during
removal.
27