English
Owner's manual
Storage
1. Empty the fuel tank and run the engine out of fuel.
2. Empty the oil tank.
3. Clean the entire unit before storage.
4. Store the unit in a dry place out of the reach of children.
5. Always cover the cutting attachment with guide bar scabbard during storage.
9. TROUBLE SHOOTING GUIDE
Problem
Starting failure.
WARNING. Make sure the icing
prevention system is not working.
Lack of power / Poor
acceleration / Rough idling.
Oil does not come out.
If the unit seems to need further service, please consult with an authorized service shop in your
area.
10. WASTE DISPOSAL AND ENVIRONMENTAL PROTECTION
Never pour remainders of chain lubricant or 2‐stroke fuel mixture in the drain or
sewerage system or soil, but dispose of it in a proper, environmentally friendly way, e.g.,
at a special collecting point or dump.
If your device should become useless somewhere in the future or you do not need it
any longer, do not dispose of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner. Thoroughly empty the oil/lubricant
and fuel tanks and dispose of the remainders at a special collecting point or dump.
Please also dispose of the device itself at an according collecting/recycling point. By
doing so, plastic and metal parts can be separated and recycled. Information concerning
the disposal of materials and devices are available from your local administration.
46
Cause
Check fuel for water or substan-
dard mixture.
Check for engine flooding.
Check spark ignition.
Check fuel for water or substan-
dard mixture.
Check air filter and fuel filter for
clogging.
Check carburetor for inadequate
adjustment.
Check oil for substandard quality.
Check oil passage and ports for
clogging.
Solution
Replace with proper fuel.
Remove and dry the spark plug.
Then pull the starter again with
no choke.
Replace with a new plug.
Replace with proper fuel.
Clean.
Readjust speed needles.
Replace.
Clean.