Installation Steps; Care And Cleaning - LUND Interceptor Instrucciones De Instalación

Installation Steps

Install (6) screws with washers.
3
Turn both of the hood bumpers counter clockwise
5
Apply bump ons to surface of hood
7

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Lund
and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is top quality in terms of
fit, durability, finish and ease of installation.
™
NOTE: Actual application may vary slightly from illustrations.
hood shield
screw
1 1/2 turns.
®
branded products offered by Lund International, Inc. We take the utmost pride in our products
800-241-7219 • Visit us at lundinternational.com
© 2014 Lund International, Inc. All rights reserved.
Lund and the Lund
® ®
Tighten all (6) screws until snug to secure
seal
4
washer
6
Lund International
logo are trademarks of Lund International, Inc.
Page 2 of 2
hood shield to hood.
NOTE: DO NOT OVER TIGHTEN
Close Hood.