Bosch PMF 180 E Multi Manual Original página 17

Assembly
Changing the Tool
Before any work on the machine itself, pull
the mains plug.
Selecting the Application Tool/Accessory
The following table shows examples for application tools. Further application tools can be found in
the extensive Bosch accessories program.
Accessory
BIM segment
saw blade
Base plate
for sanding,
series Delta
93 mm
HCS plunge
cut saw blade,
wood
HCS plunge
cut saw
blades, wood
BIM plunge
cut saw
blades, metal
HM-Riff seg-
ment saw
blade
HM-Riff delta
plate
Scraper, rigid
Bosch Power Tools
Material
Wooden materials,
plastic, non-ferrous
metals
Depends on sand-
ing sheet
Wooden materials,
soft plastics
Wooden materials,
soft plastics
Metal (e.g. unhard-
ened nails, screws,
smaller profiles),
non-ferrous metals
Grouting joints, soft
wall tiles, glass-fi-
bre reinforces plas-
tic and other abra-
sive materials
Mortar, concrete re-
mainders, wood,
abrasive materials
Carpets, coverings
Wear protective gloves when changing appli-
cation tools/accessories. Contact with the ap-
plication tool/accessoriy can lead to injuries.
Application
Separating and plunge cuts; also for sawing
close to edges, in corners and hard to reach
areas;
Example: shortening already installed bottom
rails or door hinges, plunge cuts for adjusting
floor panels
Sanding surfaces close to edges, in corners
or hard to reach areas;
Depending on the sanding sheet for, e.g.,
sanding wood, paint, varnish, stone
Separating and deep plunge cuts; also for
sawing close to edges, in corners and hard to
reach areas;
Example: narrow plunge cut in solid wood for
installing a ventilation grid
Smaller separating and plunge cuts;
Example: Cut-outs in furniture for cable con-
nections
Smaller separating and plunge cuts;
Example: Shortening narrow profiles, cutting
fastening elements such as staples
Cutting and separating close to edges, in cor-
ners or hard to reach areas;
Example: Removing grouting joints between
wall tiles for repair work, cutting openings in
tiles, gypsum boards or plastic
Rasping and sanding on hard surfaces;
Example: Removing mortar or tile adhesive
(e.g. when replacing damaged tiles)
Scraping on hard surfaces;
Example: Removing carpet and tile adhesive
English | 17
2 609 004 835 | (12.5.10)