Samsung WF231 Serie Manual De Instrucciones página 32

troubleshooting and
information codes
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
32_ troubleshooting and information codes
WF241ANW-02832E_EN_v1.indd Sec10:32 WF241ANW-02832E_EN_v1.indd Sec10:32
A fault is detected in the water
level sensor.
Jammed Key.
Motor speed sensor problem.
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Too much suds is detected during
the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will resume operation.
When it finishes washing, the End
and Sd codes will blink in turn.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
2011-08-10 2011-08-10 4:20:53 4:20:53