Uline KIHLBERG H-1440 Guia De Inicio Rapido página 3

MAINTENANCE
Before servicing, always disconnect the tool
from the air supply, empty the magazine
and read the Safety Warnings section before
starting maintenance.
Check the proper functioning of all safety devices daily.
Carefully inspect:
• The trigger and safety yoke move freely without
binding or sticking.
• All screws and nuts are securely tightened.
This tool does not require special servicing. It only needs
regular cleaning with a non-aggressive (non-corrosive)
cleaning agent.
WARNING: Do not remove any parts for
cleaning purposes.
PAGE 3 OF 9
SERVICING THE STAPLER
LUBRICATION
To ensure a safe function and endurance:
• For high frequency stapling, we recommend
• Grease sliding or moving parts with multipurpose
CLEARING JAMS
Generally, you will not need to disassemble any parts to
clear jamming in the nozzle plate.
1. Grip the staple with a pair of flat-nosed pliers at the
2. Carefully remove the staple.
1-800-295-5510
uline.com
lubricating oil. Apply a small amount of lubricating
oil in the nipple each day or approximately 10 drops
once a week.
grease if they have been cleaned or replaced.
exit from the front nozzle plate.
0421 IH-1440