Operating Instructions; Inspection And Maintenance - Bosch T40137 Instrucciones Originales

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 47
en-us | 44 | T40137

3 Operating Instructions

1.
Check the reception for completeness and visible
damages such as signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Do not use the support when defects are
noted and discard it immediately.
2.
Check all threads for proper function.
3.
Carry out the necessary preparation work for the
use of the support in accordance with the
workshop manuals.
4.
Tighten the hexagon screws with 20 Nm.
5.
Use further accessories as described in the
workshop manual.
6.
Attach the support T40137 vertically on the
workshop crane (e.g. VAS 6100) with an approved
support as described in the workshop manuals.
WARNING
Risk through falling load!
Incorrect attachment of the support may result in a
tilting or falling load. This could result in serious injuries
and severe damage to materials.
Fasten the support to the workshop crane exactly as
described in the workshop manuals. Use further
approved accessories if necessary.
Check the secure seat of the support T40137 before
lifting the load.
Lift the support T40137 vertically only.
Observe the operating manual of the used
accessories.
7.
Carry out further work as described in the
workshop manuals.
8.
Ensure that all parts of the special tool have been
removed after completing the repair work.
2018-07-02

4 Inspection and Maintenance

Check the reception for completeness and visible
damages such as signs of wear, deformation,
breakages, cracks, and corrosion damages prior to
each use. Do not use the support when defects are
noted and discard it immediately.
Please contact your 1st level support representative
with any queries.
NOTICE
Modifications to this product which have not been
expressly approved by the manufacturer will void any
warranty. The manufacturer assumes no liability for
personal injury or damage to materials which occur as
the result of improper use of this product.
Bosch Automotive Service Solutions GmbH
Am Dörrenhof 1
85131 Pollenfeld-Preith
Germany
loading