Useful Tips; Cleaning And Maintenance - Lelit PL042TEMD Manual De Instrucciones

HOW TO SET THE BOILER'S TEMPERATURE BY MEANS OF THE PID:
The PID has been set by the producer of this machine on a temperature of 95°C for coffee mode and on 125°C
for steam mode. In order to change the temperatures please proceed as follows:
press the button
-
on 95°C
press the button
-
set on 125°C
as soon as the display shows the writing t1 or t2 press the button
-
temperature. NB: in order to change the temperature's value it's necessary to press the button
first and only afterwards you can help yourself with the buttons
desired temperature, decreasing or increasing it.
after 3 sec. from pressing the last button, the inserted temperature is memorized and the display shows
-
the set temperature for coffee or steam.
the temperature's value can be set starting from a min. of 80C° up to a max. of 130C° for coffee mode
-
and from a min. of 120°C up to a max. of 140°C for steam mode. NB: the display will flash while changing
from steam mode to coffee mode and it will automatically stop only after reaching the set temperature for
coffee mode.

Useful Tips:

The strainers (9 and 10) do not need to be washed after every single use but we suggest checking that
−
the holes are not obstructed.
For a better result, we suggest keeping the cups warm on the cup-warmer (2) which only operates by
−
machine on.
The PID (27) is already set by the producer on the right temperature for an excellent espresso and a
−
constant steam distribution. During heating and coffee or water distribution, the temperature can oscillate
(+/- 10/12°C). Also, a warning has been inserted for coffee mode (t1): after 108°C the PID's display shows
the temperature but intermittently; this is normal and it warns the user that the temperature is too high
for a good espresso.

CLEANING AND MAINTENANCE

Cleaning and maintenance of the machine are essential for the quality of the coffee and the durability of the
appliance.
The machine must be cleaned at least once a week.
Before starting, remove the plug from the electrical outlet and allow the machine to cool.
Use a soft cloth, preferably microfiber, like the Lelit cloth (code MC972 - not included), and moisten
it with plain water. Do not use abrasive detergents and do not immerse the machine in water.
For thorough maintenance, we suggest you use the Lelit brush (code PL106 - not included), which will help you
clean the nozzles and the spaces between the ga-skets more effectively, removing stains and coffee residues
from even the smallest cracks.
Warm running water can be used to clean the removable parts of the machine. The filters and filterholder should
never be washed in a dishwasher.
There is no need to clean the filters after each use, but just to ensure they are not clogged.
However, to ensure the best performance from your machine, it is essential to thoroughly clean the steam wand
and filterholder after each use.
The filterholder should be cleaned to remove the greasy coffee residues that can negatively affect the taste of
your espresso.
Wash the exterior part of the steam wand with a damp cloth and release a little steam to remove any milk
residues from inside the tube, as these could obstruct the steam output, making it more difficult to froth milk
properly.
once: the display will show the writing "t1" that refers to the coffee thermostat set
twice: the display will show the writing "t2" that refers to the steam thermostat
to change the previously set
and in order to set the
English
Pag. 13