Cameo 12X3W TRI LED RGB PAR CAN IP65 Manual De Usuario página 11

OPERATION:
COLOUR CHANGE
Press the MODE button repeatedly until "Jxxx" appears in the display. Now
the light is in colour change mode. Afterwards, press ENTER and then use
the UP and DOWN buttons to select the colour change function (7 colours)
"JU00" or stroboscope "JF00". To set the colour change rate 00 - 99 and
the stroboscope rate (00 = stroboscope deactivated, 99 = maximum
stroboscope rate), press ENTER again (characters 3 + 4 blink) and then use
the UP and DOWN buttons to change the values.
Press ENTER again to confirm.
Note: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
COLOUR BLENDING
Press the MODE button repeatedly until "Fxxx" appears in the display. Now
the light is in colour blend mode. Afterwards, press ENTER and then use
the UP and DOWN buttons to select the function colour blending (7 colours)
"FA00" or the stroboscope effect "FF00". To set the colour blending rate
00 - 99 and the stroboscope rate (00 = stroboscope deactivated, 99 =
maximum stroboscope rate), press ENTER again (characters 3 + 4 blink) and
then use the UP and DOWN buttons to change the values.
Press ENTER again to confirm.
Note: Both functions can also be used simultaneously.
7 COLOURS
Rate 00 - 99
STROBE
Rate 00 - 99
11