Alice's Garden OMBREC Manual De Instrucciones página 37

STEP 2: MARKING THE PLACEMENT ON THE WALL
Once you have found the best placement, draw a horizontal line at the desired height of the upper holes
(which are 10cm above the lower holes). Use a tape measure, spirit level and pencil. Use the dimensions
in the diagram to mark vertical dashes on the wall where the brackets will be placed.
2
Take a bracket and align its upper holes with the horizontal line. The middle of the
bracket must be placed on the previously drawn vertical dashes. Once these two conditions are fulfilled,
mark the location of the holes.
10cm
H
10cm
H
12cm
10cm
>20cm
H 12cm
10cm
>20cm
H
WARNING! Always check the piece is straight vertically and horizontally using a spirit level.
06/11/2019
12cm
FOR THE 3X2.5
>20cm
12cm
>20cm
FOR THE 4X3
165cm
165cm
265cm
265cm
330cm
330cm
EN
37