Intended Use; Symbols And Meanings - wolfcraft MASTER 200 Traducción Del Manual De Instrucciones Original

Introduction
• CAUTION! Carefully read all the safety information and instructions that were supplied with
the MASTER 200. Failure to comply with safety information and instructions can lead to severe injury.
• Keep the manual in a safe place for future reference.

Intended use

The universal clamping and working table (Master 200) has the following uses:
• Temporary fixing of workpieces for further processing (e.g. drilling, grinding etc.).
• Load-bearing surface for workpieces and tools
• Indoor working and storage
• Max. load: 180 kg

Symbols and meanings

Warning of general danger
Read instructions/information.
Wear safety goggles.
Wear ear protection.
Notes on Safety
• Before commencing work test the operatability of the appliances and tools. Never work with damaged
or blunt tools.
• Check that the mounting of the appliances used is correct (e. g. bolted joints) before commencing work.
• Ensure the work piece is tight and secure.
• The space between the worktable and the backing pad should be no more than 3 mm.
• Take care that there is always a stable support for the workpiece or clamp the component
to be machined tightly.
• Take care that you and the appliances used are always standing securely.
• Adhere to the data quoted regarding minimum/speeds and direction of rotation on the product,
packaging or in the operating instructions for the appliances and tools to be used.
• Use tools only for their actual intended purpose.
• Never remove existing protective devices.
• Use goggles or breathing protection for mouth/nose during all jobs, that cause dust, chips,
fumes or sparks.
• Protect your hearing when doing work causing a lot of noise.
• Wear safety glasses, strong protective gloves and a mouth and nose protector for all work in which dust,
shavings, fumes or sparks occur.
• Never reach into equipment which is in operation.
• Keep children away from your workshop and store your equipment and tools in a safe place.
• Never allow inexperienced personnel to work with your equipment and tools without instructions
or supervision.
t
Wear a dust mask.
Wear protective gloves.
Disconnect mains plug
17