Kohler K-9674 Guia De Instalacion página 3

7-5/8"
7-5/8" (19.4 cm)
(19.4 cm)
2 Screws
2 Screws
1/2" IPS/ 3/4" Tap
59"
(149.9 cm)
Overall
Length 1/2"-14 NPSM Tap
2 Screws
K-9650
7-5/8" (19.4 cm)
69" (175.3 cm)
Overall Length
1/2"-14 NPSM
K-9672, K-9673
1. Install the Handshower
Handshower and Hose Installation
From the top of the bath or finished deck, insert the smaller end
of the interlock hose down into the handshower guide and
through the mounting hole.
To Replace Showerhead: Remove present showerhead from
shower arm. Place gasket in hose coupling and fasten to shower
arm.
To Use Wall Elbow: Remove present showerhead and shower
arm. Install 1/2" pipe nipple (not supplied) to extend 1/2" (1.3
cm) from wall. Slip flange over nipple. Apply pipe sealant to
threads and fasten elbow. Fasten hose coupling to elbow.
To Use With Showerhead: Remove present showerhead from
shower arm. Fasten diverter valve to shower arm. Replace
showerhead on diverter valve. Fasten hose coupling to side outlet
of diverter valve.
Kohler Co.
12-3/8" (31.4 cm)
2 Screws
23-3/4"
(60.3 cm)
2 Screws
1/2"-14 NPSM
59" (149.9 cm)
Overall Length
K-9652 K-9674
12-1/4" (31.1 cm)
2 Screws
23-3/4"
(60.3 cm)
59" (149.9 cm)
Overall Length
2 Screws
1/2"-14 NPSM
K-9654
3
69" (175.3 cm)
Overall Length
105700-2-A