Electrical Specifications - Klein Tools MM500 Manual De Instrucciones

FEATURE DETAILS
G
F
Apo
D
A-HOLD
3
B
1 2
A. Use proper safety-rated leads.
Do not attempt to measure more than 750V.
B. Voltage Select Button
• Auto detect AC or DC
C. Resistance / Continuity Button
• Selects Resistance or Continuity Function
D. Auto Hold
• Press the "A-HOLD" button
• Auto Hold captures the first stable displayed value until a new stable value is measured.
The meter will then capture the new value and emit a beep (V and Ohm functions).
E. Back Light
• Press and hold the "A-Hold" button to enable / disable lights.
• Using lights drains the battery significantly.
F. Auto Power-Off
• Device will power off after 30 minutes non-use.
• Press " V or " /
"
• APO timer resets when a " V
• Holding the " V or "
"
G. Battery / Replacement
• When indicator is displayed on the LCD, batteries must be replaced.
H
• Remove back screws and replace 2 x AAA batteries.
On Back
H. Probe Storage / Receptacle Testing
• To store probes, ensure the collar of the probe fits the probe holder channel and press down.
• When testing receptacles, slide the probes into the probe holder from the top of the unit. The
probe holder is designed to space the probes for easy testing of receptacles.
E
Apo
1. AC Voltage: <750V
C 4
G
A-HOLD
On Back
Apo
2. DC Voltage: <750V
On Bottom
A-HOLD
A
Apo
3. Resistance: < 4K .
A-HOLD
to wake.
"
or " measurement is made.
" "
/ button for one second while turning on disables Auto Power-Off.
"
FUNCTION INSTRUCTIONS
• With the unit OFF or in " " mode, press the " V
button for voltage. Unit defaults to AC Voltage.
Apo
• Attach RED lead to " V input, BLACK lead to
"
A-HOLD
COM.
• Display auto detects and shows AC voltage.
• Power the unit OFF by holding the " V " or "
button for one second.
• With the unit OFF or in " " mode, press the " V
button for voltage. Unit defaults to AC Voltage.
Apo
• Attach RED lead to " V " input, BLACK lead to
A-HOLD
COM.
• Display auto detects and shows DC voltage.
• Power the unit OFF by holding the " V " or "
button for one second.
• Do not attempt to measure resistance on a live
circuit.
Apo
• With the unit OFF or in " V " mode, press the "
A-HOLD
button once for resistance.
• Attach RED lead to " V " input, BLACK lead to COM.
• Display shows resistance.
• Power the unit OFF by holding the " V " or " /
button for one second.
4. Continuity
Apo
Apo
A-HOLD
A-HOLD
• Press the " / " button to select continuity. The "
• Buzzer sounds and RED color indication light illuminates if reading is less than 25 .
• Power the unit OFF by holding the " V

ELECTRICAL SPECIFICATIONS

DC Voltage Measurement
Range Resolution Accuracy
"
± 1 ~ 399.9 0.1V
± (0.5% + 3 digits)
± 400 ~ 599 1V
± 600 ~ 750 1V ± (0.5% + 5 digits)
Overload Protection: 750V Input Impedance:
/ "
AC Voltage Measurement
Range Resolution Accuracy
1 ~ 399.9 0.1V
± (1.2% + 5 digits)
"
400 ~ 599 1V
600 ~ 750 1V ± (1.2% + 8 digits)
Overload Protection: 750V Frequency:
Input Impedance: >10M Response:
/ "
Continuity Test
Overload Protection Open Circuit Voltage
600V Appx. 0.44V
Resistance Measurement (Ohms)
/ "
Range Resolution Accuracy
0 ~ 399 0.1
± (0.8% + 4 digits)
0.4k ~ 4k 0.001K
"
Overload Protection: 600V
Apo
A-HOLD
" symbol will appear in the LCD.
" or " / " button for one second.
>10M
50 to 60 Hz
Averaging
Tone
< 25