ASROCK X570 Creator Manual De Instrucciones página 40

RGB LED Header
(4-pin RGB_HEADER1)
(see p.1, No. 27)
Addressable LED Header
(3-pin ADDR_LED1)
(see p.1, No. 26)
DisplayPort 1.4 Input
(DPIN2)
(see p.1, No. 30)
1
12V G R B
1
GND
DO_ADDR
VOUT
This RGB header is used to
connect RGB LED extension
cable which allows
users to choose from various LED
lighting effects.
Caution: Never install the RGB
LED cable in the wrong orienta-
tion; otherwise, the cable may
be damaged.
*Please refer to page 52 for
further instructions on this
header.
This header is used to connect
Addressable LED extension cable
which allows users to choose
from various LED lighting
effects.
Caution: Never install the
Addressable LED cable in the
wrong orientation; otherwise,
the cable may be damaged.
*Please refer to page 53 for
further instructions on this
header.
This motherboard
provides a DisplayPort 1.4
Input connector. This
connector is used to
connect a DisplayPort
compatible device.
X570 Creator
37