Troubleshooting - PROZIS Equinox Manual De Instrucciones

EN
4
4. Make sure the jar lid is 5. Make sure the equipment
firmly set. is stable and not liable to
slip, and that the suction
cups are firmly held so that
the appliance cannot tip over
due to the vibration. Insert
the power plug into the wall
socket when the glass jar is
filled and mounted with the
lid fitted and placed.
7
7. Turn the speed control dial 8. Turn the glass jar
anticlockwise to stop. anticlockwise and remove it.
TIPS
PULSE - Momentary burst of power.
CHOP (speed 1) - Low speed to combine more delicate foods with a folding motion. Good
for combining wet and dry ingredients.
LIQUIFY (speed 2) - High speed, ideal for breaking down ingredients to make ice-based
drinks and other finely blended mixtures.

TROUBLESHOOTING

Some issues that may arise can be solved by the user. If the problem persists after having
tried the following solutions, please contact Prozis customer service.
8
5 6
6. Once the mixer jar is filled,
completely sealed, and
securely fitted to the motor
block, you can then switch
the appliance on. Turn the
speed control dial clockwise
to start it.
8 9
9. Pull the jar lid up gently to
remove it.
TECHNICAL PROBLEM CAUSE
The appliance is not plugged
in.
The wall outlet is not ener-
gized.
The appliance is not switched
on.
Overheated appliance.
The appliance is not working.
Overcurrent protection is on.
There's too much food in
the jar.
The appliance is malfunc-
tioning.
There is too much food in the
jar. The motor is overloaded.
The blades are rotating very
slowly.
There is not enough liquid in
the jar. The motor is over-
loaded.
Ingredients are too large.
The food is not fully blended.
There is too much food in
the jar.
EN
SOLUTION
Insert the plug into the wall
outlet.
Check fuses and circuit
breaker.
Turn the control knob to the
setting position to place the
appliance in standby mode.
Turn the control knob to the
OFF position to switch the
appliance off. Resume the
blending operation.
Turn the control knob to the
OFF position to switch the
appliance off. Resume the
blending operation.
Turn the control knob to the
OFF position, remove some
of the food, shake ingredients
to redistribute them and re-
start the blending operation.
Turn the control knob to the
OFF position, unplug the
appliance from the wall outlet
and contact Prozis customer
service.
Turn the control knob to the
OFF position, remove some
of the food, shake ingredi-
ents to redistribute them and
restart the blending operation.
Turn the control knob to the
OFF position, add some liq-
uid and restart the blending
operation.
Turn the control knob to the
OFF position, remove some
of the ingredients and cut
them into smaller pieces.
Turn the control knob to the
OFF position, remove some
of the food, shake the jar to
redistribute the ingredients
and then restart the blending
operation.
9