Maintenance And Cleaning; Product Description - PROZIS Equinox Manual De Instrucciones

EN
the jar in hot water or the dishwasher, let it cool down
before using it to chop ice.
• Never add hot or warm water to the glass jar imme-
diately after chopping ice.

Maintenance and cleaning

1. Unplug the power cord from the power outlet after each use.
2. Jug, blades and lids.
Make sure not to let any food residue to dry inside the jar, or on the blades or lids. Follow
these steps as soon as possible after use:
• Rinse most of the residue off the jar, blades and lids.
• Hand wash using warm, soapy water, a mild liquid detergent and a non-abrasive sponge.
3. Motor base
To clean the motor base, wipe it with a soft, damp cloth and then dry it thoroughly. Wipe any
excess food particles from the power cord.
CLEANING AGENTS
Do not use abrasive scouring pads or cleaners on either the motor base or any part of the
blender, as they may scratch the surface. Use only warm soapy water and a soft cloth.
DISHWASHER
The jar, lids and blade assembly may be washed in the dishwasher on the top shelf only.
Storage
STUBBORN FOOD STAINS AND ODORS
• Strong-smelling food such as cumin and coriander, and some vegetables such as carrots,
may leave an odor or stain. To remove them, pour warm soapy water up to the MAX mark.
Set aside and let it soak for 5 minutes. Wash using a mild detergent and warm water, rinse
well and dry thoroughly.
• Store the glass jar with the lid off.
• Store your blender upright with the blender jar assembled on the motor base, or beside
it. Do not place anything on top of it. To allow air to circulate, keep the lid off.
6
User manual
PACKAGE CONTENTS
• 1 x Prozis Equinox, which includes:
• 1 x Measuring Cup
• 1 x Jar Lid
• 1 x Glass Jar
• 1 x Blade System
• 1 x Blender Base
• 1 x User Manual

PRODUCT DESCRIPTION

1. Measuring Cup
2. Jar Lid
3. Glass Jar (1.5 L)
4. Blade System
5. Speed Control Dial
HOW TO USE
1 2
1. Put the measuring cup in 2. Fill the glass jar with the
the jar lid. ingredients and press the
jar lid firmly onto the glass
jar. Make sure to check that
the appliance is switched
off and that the power cord
is disconnected before
mounting the glass jar.
EN
3
3. Place the filled glass jar
onto the blade system by
turning it clockwise. The
motor can only start when
the glass jar is securely
positioned.
7