Connecting Auto Iris Lens Connector; Mounting Lens - Samsung SBC-330A Guia Del Usuario

Connecting Auto Iris Lens Connector

Prepare the following Auto Iris Lens Connector
supplied with the camera.
Rib
Pin3
Pin1
Pin2
Connect the cable of the control cable, whose
covering is stripped, to the Auto Iris Lens Connector
as shown below.
Pin Number DC Control Type Video Control Type
1 Damp(-)
2 Damp(+)
3 Drive(+)
4 Drive(-)
5
User Guide
Pin4
Power Source (+9V)
Not used
Video Signal
GND
Mounting the Lens
Loosen a screw fixing the Flange Back Adjustment
Ring by turning it counterclockwise and turn the
Adjustment Ring to the "C" direction
(counterclockwise) until it stops. Failure to do so
may result in a damage caused by the bump of the
lens against the image sensor part in the camera
when mounting the lens.
C Direction
V I D
E O
D C
L E N
S
Auto Iris
Control Cable
6
User Guide
E