Tabla de contenido
Idiomas disponibles
Idiomas disponibles
30
MAGIC REMOTE CONTROL FUNCTIONS
Registering Magic Remote Control
The Magic Remote Control operates by pairing
with your TV.
Please register the remote as follows.
How to register the Magic Remote Control
To register automatically, turn the
TV on and press the
When registration is completed, the
completion message appears on the
screen.
(Wheel)
If registration fails, turn the TV off
and back on, then press the
Wheel (OK) to complete registration.
How to Re-register the Magic Remote Control
1 Press and hold the
SMART
seconds to reset, then register it
BACK
by following How to register the
Magic remote control above.
2 To re-register the Magic remote
control, press and hold the
SMART
BACK button for 5 seconds
toward the TV.
How to use Magic Remote Control
1 You can move the pointer by
aiming the Pointer Receiver of the
remote control at your TV then
move it left, right, up or down.
»
If the pointer does not work
properly, leave the remote control
for 10 seconds then use it again.
2 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
»
If the pointer has not been used
for a certain period of time, it will
disappear.
Wheel (OK).
BACK and
buttons together for 5
If you press
Magic remote control, the screen
1
appears.
Shows information about the current
program and screen.
2
You can select More Menu.
Precautions to Take when Using
the Magic Remote Control
Use the Magic remote control within the
y
maximum communication distance (10 m,
32.8 ft). Using the remote control beyond this
distance, or with an object obstructing it, may
cause a communication failure.
A communication failure may occur due to nearby
y
devices. Electrical devices such as a microwave
oven or wireless LAN product may cause
interference, as these use the same bandwidth
(2.4 GHz) as the Magic remote control.
The Magic remote control may be damaged or
y
may malfunction if it is dropped or receives a
heavy impact.
Take care not to bump into nearby furniture or
y
other people when using the Magic remote
control.
Manufacturer and installer cannot provide
y
service related to human safety as the applicable
wireless device has possibility of electric wave
interference.
It is recommended that an Access Point (AP) be
y
located more than 1 m (3.28 ft) away from the
TV. If the AP is installed closer than 1 m (3.28 ft),
the Magic remote control may not perform as
expected due to frequency interference.
Wheel (OK) on the
Capítulos
Tabla de contenido
Solución de problemas
