30
REMOTE CONTROL
Registering Magic Remote Control
The Magic remote Control operates by pairing with
your TV. Once you purchased the TV, please
register the Magic remote control as follows;
How to register the Magic Remote Control
BACK
HOME
To register the remote control, press
the Wheel (OK) button on the remote
control.
How to Re-register the Magic Remote Control
VOL
CH
after Registration Failure
1 Press and hold the BACK
BACK
My APPS
BACK
HOME
HOME
seconds to reset, then register it
BACK
by following "How to register the
HOME
BACK
HOME
Magic remote control" above. (Once
the reset is complete, the light on
the Pointer blinks.)
2 To re-register the Magic remote
control, press and hold the BACK
button for 5 seconds toward the TV.
(Once the reset is complete, the
VOL
CH
VOL
light on the Pointer blinks.)
VOL
CH
How to use Magic Remote
My APPS
My APPS
Control
My APPS
1 If the pointer disappears, move
the remote control slightly to left
or right. Then, it will automatically
appear on the screen.
»
If the pointer has not been used
y
for a certain period of time, it
will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»
If the pointer does not work
y
properly, leave the remote
control for 10 seconds then use
it again.
and
buttons together for 5
BACK
HOME
BACK
VOL
CH
My APPS
VOL
Precautions to Take when Using
the Magic Remote Control
Use the remote control within the maximum
y
y
communication distance (10 m, 32.8ft).
Using the remote control beyond this
distance, or with an object obstructing it,
may cause a communication failure.
A communication failure may occur due to
y
y
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
The Magic Remote Control may be damaged
y
y
or may malfunction if it is dropped or
receives a heavy impact.
HOME
Take care not to bump into nearby furniture
y
y
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
y
y
service related to human safety as the
applicable wireless device has possibility of
HOME
electric wave interference.
CH
It is recommended that an Access Point (AP)
y
y
be located more than 1 m (3.28 ft) away
from the TV. If the AP is installed closer than
1 m (3.28 ft), the magic remote control may
not perform as expected due to frequency
interference.
CH
My APPS