LEGRAND Céliane 672 14 Manual Del Usuario página 9

Variador con piloto
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

• Transmitter (leader) : the dimmer switch can simultaneously control a set of receivers that were linked to it in the
(1)
learning
:
- using the ON, OFF buttons :
The dimmer switch lets you pilot the lighting points linked to the receivers, using the ON or OFF buttons for :
- illumination by a short press on the ON button
- increasing light level by a long press on the ON button
- switch off by a short press on the OFF button
- decreasing light level by a long press on the OFF button
Only ON button learning is necessary, the OFF button is learnt automatically :
- using buttons 1 and 2 :
The dimmer switch lets you pilot the lighting points linked to the receivers, using button 1 for :
- scenario (lighting level) by short press on button 1
- increasing light level by a long press on button 1
The dimmer switch lets you pilot the lighting points linked to the receivers, using button 2 for :
- scenario (lighting level) by a short press on button 2
- increasing light level by a long press on button 2
To produce light level variation, we recommend the same receiver group is linked to buttons 1 and 2.
(1)
Learning : procedure that enables a scenario to be defined and saved.
(2)
Scenario : set of controls executed simultaneously on the various receivers (actors) that have been linked to the transmitter (leader) during the
learning procedure.
Personalize the lighting level of buttons 1 and 2 (outside learning)
The lighting level of the ON button cannot be modified.
On button 1 :
- set the lighting level using the ON, OFF buttons by a long press
- validate by simultaneous pressing on the 1 and ON buttons for 5 secs (after switching off, the load comes on
again at the set level)
- the level of button 1 is then saved.
On button 2 :
- set the lighting level using the ON, OFF buttons by a long press
- validate by simultaneous pressing on the 2 and OFF buttons for 5 secs (after switching off, the load comes
on again at the set level)
- the level of button 2 is then saved.
Notes :
This operation can be performed with the rockers mounted.
17
18
Tabla de contenido
loading

Tabla de contenido