Pcs400R Communication - LG PCS400R Servidor Pro:Centric Instalación Y Configuración

PCS400R Communication

If you are unable to establish remote communication with the PCS400R, refer to the following flow chart.
Cannot Communicate with
PCS400R
Check that the proper IP address
for the PCS400R is being targeted.
If necessary, adjust and then
reattempt communication.
Problem solved?
No
Ensure your PC's IP address
is on the same subnet as
the PCS400R's IP address.
If necessary, adjust and then
reattempt communication.
Problem solved?
No
Contact LG.
Yes
End
* Note: For example, if the PCS400R is configured with IP
address: 192.168.1.x and Network mask: 255.255.255.0, the
PC's IP address cannot be: 192.168.2.x.
Yes
End
To verify the PCS400R IP address:
• If DHCP is enabled, check the router for DHCP IP
address assignments to determine whether the
proper IP address is being used to communicate
with the PCS400R.
• If DHCP is not enabled, connect a PC to the
PCS400R Service Port, display the System
Information, and ensure the IP address shown in
the Ctrl IP field is the IP address being used to
communicate with the PCS400R. If necessary,
update the Control Port configuration as
described in this document.
39