Treca Interiors CAD 3 Instrucciones De Instalacion Y Uso página 29

12/2015
Activate the synchronization
IMPORTANT :
- The 2 bed base ensembles
need to have been preset for
the Synch Mode
-
Activate the synchro function:
Press button 16 on any of the 2 remote
controls and hold it pressed down. The 2
bed bases are now synchronized and
should automatically move into the same
position.
Depending in which position the bed
bases were initially moving into position
may take few seconds. Once the bed
bases are in the same positon, the
motors top moving after a sound signal
can be heard.
Release button 16 only after the sound
signal
- The screen shows: « Syn On »
as soon as the proceeding is
finished.
One the synchro function has been
activated the bed bases can be operated
with either remote control. Positions are
shown on buttons 3 to 1.
The LED function is not synchronized, the
light of each bed base has to be
controlled with its own remote control.
- The screen show "Synchro" when
the bed base is moving under the
synchro mode
Deactivation of the synchro function
Press the button ones to stop the synchro
mode.
- The screen shows « Syn Off »
-29-
SAVOIR VIVRE SAVOIR DORMIR
N° 1500 046 / B