Treca Interiors CAD 3 Instrucciones De Instalacion Y Uso página 27

12/2015
The bedbase needs to be unplugged
Press simultaneously button 3 and 4.
- On the screen appears « Teach In »
and « Search »
Release the button.
- The search is launched
Plug the bedbase in again
Wait for 20 seconds.
Once the remote control is recongnized
by the receiver the screen shows:
-
MASTER
Once the radio receiver, a remote
controlled plug or any other device has
been recognized the screen shows:
-
DONE
After 3 seconds the screen returns to its
initial display (Symbol of the bed, hours
and level of battery)
The bed base ensemble can now be
used.
To start initialization the motors must be
put at their initial position.
To do so press button 4 until the motors
are in the initial positon.
- Once the
achieved the symbol
appears on the screen
To initialize a second bed base ensemble
start the same operation all over
-27-
SAVOIR VIVRE
initial position
(fig 1)
SAVOIR DORMIR
is
fig 1
N° 1500 046 / B