Kohler K-16238 Guia De Instalacion página 4

Bidet
1. Install the Spray Assembly
Remove the spray head and flange.
Thread the nut, metal washer, and rubber washer to the bottom
of the shank.
Apply a ring of plumbers putty or other sealant to the bottom of
the shank according to the putty manufacturer's instructions.
From the underside of the bidet, insert the shank through the
spray hole.
From the top of the bidet, thread the flange onto the shank.
Securely thread the spray head as far as it will go onto the shank.
Thread the flange until it is snug against the spray head.
Securely tighten the nut onto the shank with a wrench. Do not
overtighten.
Remove any excess putty or sealant.
1054192-2-A
Spray Head
Flange
Shank
Rubber
Washer
Nut
Metal
Washer
4 Kohler Co.