Operating Instructions - Phase Linear PCD161 Manual Del Usario

PCD161

OPERATING INSTRUCTIONS

1
Power On/Off Button (PWR)
Press the PWR button (1) to turn the unit on or
off.
2
Liquid Crystal Display Panel
The Liquid Crystal Display (LCD) panel displays
the frequency, time and all activated functions.
Table 1: LCD Display Indicators
ST STEREO Radio stereo indicator
!!!!! SIGNAL Signal strength indicator
XBS X-BASS X-BASS on indicator
MUT MUTE MUTE on indicator
PEQ PEQ Preset Equalizer Indicator
LOC LO/DX Local Radio Reception
Indicator
NOTE: It is a characteristic of LCD panels
that, if subjected to cold temperatures for an
extended period of time, they may take
longer to illuminate than under normal
conditions. In addition, the visibility of the
numbers on the LCD may slightly decrease.
The LCD read-out will return to normal when
the temperature inside the vehicle increases
to a normal range.
3
Volume Control (VOL)
To increase the volume level, press the VOL (/\)
up button (3a). To decrease the volume level,
press the VOL (V) down button (3b). The
volume will increase/decrease and the level will
be shown on display panel from a minimum of
"VOL 00" to a maximum of "VOL 47". The
display will automatically return to the normal
indication 5 seconds after the last volume
adjustment or when another function is
activated.
1 4
PCD161
PWR
BY JENSEN
BAND
4
MUTE Button
Press the MUTE button (4) to silence the audio
volume. "MUT" appears in the display. Press
MUTE again to restore volume to the previous
setting.
2
CD RECEIVER
CD
REPEAT
3b 3a
AUX SEL EQ
VOL
DISP
RANDOM
AUX