HBM P8AP Instrucctiones De Montaje página 6

6
P8AP
Conversions and Modifications
The manometer must not be modified from the design or safety engineering
point of view except with our express agreement. Any modification shall
exclude all liability on our part for any damage resulting therefrom.
In particular, any repair or soldering work on motherboards or replacement of
components is prohibited. Repairs must only be carried out by HBM.
Qualified personnel
This device is only to be installed and used by qualified personnel strictly in
accordance with the specifications and with the safety rules and regulations
which follow. It is also essential to observe the appropriate legal and safety
regulations for the application concerned during use. The same applies to the
use of accessories.
Qualified personnel means persons entrusted with the installation, assembly,
commissioning and operation of the product, who possess the appropriate
qualifications for their function.
Conditions at the place of installation
Protect the transducer from moisture and dampness or weather such as rain,
snow, etc.
Maintenance
The P8AP absolute pressure transducer is maintenance free.
Accident prevention
The prevailing accident prevention regulations must be taken into account,
even though the pressure values in the destructive range are well in excess of
the full scale value. Under conditions that cannot be safeguarded, it is
necessary, for example, to implement burst protection around the transducers.
Recalibration and repair
When you send the transducer back to HBM for calibration or repair, please
specify which pressure medium is being used. It is always possible that
residual medium could be trapped in the measuring aperture. We need this
information so that we can take appropriate action and choose the correct
cleaning agent, where necessary. If we do not know the media, we may have
to refuse to calibrate or repair.
HBM A2079-3.1 en/de/fr/it/es