Delabie TEMPOSTOP Manual Del Usuario página 10

• Connect the water supply and activate the valve several times
to stabilise the timing.
Exposed wall-mounted models (except ref. 749001)
• Fix the mixer/tap to the wall with the screw(s) supplied
(the rawl plugs should be suitable for the type of wall).
• Connect the water supply and activate the valve several times
to stabilise the timing.
Exposed shower kit (ref. 749001) (Fig. F)
• Fix the shower head
the shower tray or tiled floor.
• Assemble the shower column
Place the white PVC tubes inside the column
• Insert the whole assembly into the hole in the shower head
Fix the shower head
suitable for the type of wall).
• Fix the collar
and the valve
for the type of wall).
• Connect the water supply and check that the connections are
watertight. Activate the valve several times to stabilise the timing.
Panel-mounted models
• Drill a hole Ø 56mm.
• Insert the valve through the panel, placing the back-nut behind
the panel.
• Tighten the wall plate against the valve with the panel between
the back-nut and the wall plate.
• Tighten the 3 screws on the back-nut using a 3mm Allen key.
• Connect the water supply and activate the valve several times
to stabilise the timing.
Through-the-wall models (Fig. E)
• Drill a hole Ø 21mm for the control
for the locking screw
• Mount the control
in place with the washer.
so that the nozzle
to the wall (the rawl plugs should be
over the central joint. Fix the collar
to the wall (use rawl plugs that are suitable
.
through the wall. Tighten and lock the nut
is 2.10m from
and the valve
and Ø 5.5mm
.
.
.