Num'axes PIE1044 Manual De Instrucciones página 18

- In the settings menu, the
- In the time and date as well as password setting, the
button
- In Playback mode, pressing and holding the
3. Power supply
3.1. Batteries
The camera runs on 8 AA size batteries. The product can work with alkaline or NiMH
rechargeable batteries.
You can purchase alkaline or Ni-MH AA batteries at any time on www.numaxes.com.
Before inserting or removing the batteries, the camera must be turned off (switch in the
OFF position).
When inserting the batteries, make sure to follow polarity indicated inside the battery slot.
Upside down batteries may cause device malfunction.
We strongly recommend changing the batteries when the power icon on the screen is
empty.
NOTE: Don t mix battery types! This may cause permanent damage not covered by the
guarantee.
3.2. Power adaptor
This camera can also be powered by an external adapter 6V/2A. We recommend removing
the batteries when a power adapter is used. DC power is recommended if the camera is
used for security purposes.
4. SD card
Using a memory card (from 4GB up to 32GB class 10 minimum) is required to operate the
camera. When the camera is in SETUP mode and no memory card is inserted, the LDC
screen displays No SD card .
Formatting the SD card in the trail camera before using it for the first time is strongly
recommended, especially when the card has been used in other devices. An SD card
formatted in another device may not be compatible.
Before inserting or removing the SD card, the camera must be turned off (switch in the
OFF position). Failing to do so may cause loss of or damage the files already recorded on the
memory card.
When the SD card is full, the LCD screen indicates Memory full .
PIE1044 - Indice B Mars 2020
you to go to the lower digits.
menu for deleting files, activating the slide show and write-protecting
files.
button allows you to move down.
button brings up the
button allows
18/66