Specifications; Stihl Rg-Km; Blades; Symbols On The Kombitool - Stihl RG-KM Manual De Instrucciones

English

18 Specifications

18.1 STIHL RG-KM

– Weight with cutting blades: 5.3 lbs. (2.4 kg)

18.2 Blades

– Thickness: 0.1 in. (2.5 mm)
– Minimum width (tooth): 0.2 in. (5 mm)
– Minimum length (tooth): 0.4 in. (10 mm)
– Sharpening angle: 45°

18.3 Symbols on the KombiTool

Filler hole for gear lubricant.
Push the drive tube into the
XXXXX
KombiEngine's/KombiMotor's coupling sleeve
as far as marked.

18.4 Engineering Improvements

STIHL's philosophy is to continually improve all of its
products. As a result, engineering changes and
improvements are made from time to time. Therefore, some
changes, modifications and improvements may not be
covered in this manual. If the operating characteristics or the
appearance of your machine differs from those described in
this manual, please contact your STIHL dealer or the STIHL
distributor for your area for assistance.
20
19 Approved
KombiEngines/KombiMotors
19.1 STIHL RG-KM
The KombiTool is approved for use only with the following
KombiEngines:
– STIHL KM 91 R
– STIHL KM 94 R
– STIHL KM 111 R
– STIHL KM 131 R
The KombiTool is approved for use only with the following
KombiMotors:
– STIHL KMA 130 R
Since new Kombi powerheads may be developed after
publication of this manual, ask your authorized STIHL
servicing dealer for the latest STIHL recommendations.

20 Replacement Parts and Equipment

20.1 Genuine STIHL Replacement Parts

STIHL recommends the use of genuine STIHL replacement
parts. Genuine STIHL parts can be identified by the STIHL
part number, the
STIHL parts symbol . The symbol may appear alone on
small parts.

21 Disposal

21.1 Disposal of the Power Tool

STIHL products must not be thrown in household trash or
disposed of except as outlined in this manual.
18 Specifications
logo and, in some cases, by the
0458-811-8621-A