VTrak S3000 Quick Start Guide
2.
To verify the maintenance mode settings, type net -m and press Enter.
administrator@cli> net -m
– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
CtrlId: 1
Type: Management Ethernet
IP: 192.168.10.101
MAC: 00:01:55:AE:02:AE
Gateway: 192.168.10.1
This completes the Management port setup. Go to "Task 11: Configuring Storage
on the Subsystem" on page 47.
To see the full set of CLI commands, at the admin@cli> prompt, type help and
press Enter.
Setting up VTrak with the CLU
1.
At the administrator@cli> prompt, type menu and press Enter.
The CLU main menu appears.
Figure 15.CLU main menu
2.
With Quick Setup highlighted, press Enter.
The first Quick Setup screen enables you to make Date and Time settings.
Port: 1
IPType: IPv4
IPMask: 255.255.255.0
DNS: 0.0.0.0
DHCP: Disabled
44