Promise Technology VTRAK S3000 Guia De Inicio Rapido página 19

2. If you entered a domain name and you want to append the suffix to the DNS
server, check the Append suffix to DNS lookup box.
Adding a DNS Server
If your network has Domain Name Server (DNS) and you want VTrak to work with
it, enter the DNS IP address here. You can have up to two DNS servers.
To add a new DNS:
1. Highlight one of the DNS servers and click the Delete button.
Click the Yes button to confirm.
2. Click the Add button and enter the IP address for a DNS server.
3. In the DNS (up to two) dialog box, enter the IP address of your DNS server
and click the OK button.
You return to the Network Configuration dialog box where the new DNS
appears in the list.
Specifying a Gateway
If your network has a gateway and you want VTrak to work with it, enter the
Gateway IP address in the Default gateway field.
Changing NIC Settings
An FC appliance (server) has four network ports, eth0 through eth3 . An iSCSI
appliance has up to eight network ports, eth0 through eth7 . On all appliances,
eth0 is the management port. The default IP addresses are:
eth0 – 192.168.253.10
eth1 – 10.0.0.3
eth2 – 10.0.0.4
eth3 – 10.0.0.5
Obtain network setting information from your Network Administrator.
Network port eth0 is the management port.
In step 3 below, do NOT click the Delete button for network port
eth0 .
An IP address conflict among network ports eth1 through eth3
prevents a High Availability configuration, even when those ports
are not connected.
Task 3: Configuring the VTrak Appliance
eth4 – 10.0.0.6
eth5 – 10.0.0.7
eth6 – 10.0.0.8
eth7 – 10.0.0.9
Caution
Important
19