Cutout
4. Attach the Sink
WARNING: Risk of personal injury. Metal surfaces are sharp
and can cause severe cuts. Use gloves and handle the sink
edges carefully.
Set the sink into the cutout and position squarely.
Rotate the clip jaws underneath the countertop as shown.
Tighten the clip hex nuts to draw the sink rim down firmly to the
countertop. Do not overtighten.
NOTE: Apply sealant quickly as it sets within minutes.
Apply a bead of silicone sealant around the edge of the sink rim
to create a seal between the sink and the countertop.
Immediately wipe away any excess sealant with a damp cloth,
and fill any gaps as needed.
5. Finish the Installation
Connect the drain and faucet supply fittings.
Turn on the water supply and check for leaks.
Clean up with a non-abrasive cleaner.
Care and Cleaning Instructions
For best results, keep the following in mind when caring for your
STERLING product:
Sterling
Countertop
Clip Jaw
Hex Nut
Clips
5
Sink
1014306-2-G