Cleaning And Maintenance; Technical Specifications - cecotec HYDROSTEAM 1040 ACTIVE&SOAP Manual De Instrucciones

ENGLISH
Deep cleaning function
Install the soap bottle with soap inside. Press the steam-releasing trigger and spray steam to
the desired area, for example, at a kitchen fan, kitchen stove, toilet, etc.
Floor cleaning function
Install the floor cleaning brush and attach its mop. Press the steam-releasing trigger and
spray steam to the desired area.
Operation
Open the package and check no parts are missing.
Place the steamer on a horizontal table and remove the safety valve anticlockwise.
Fill the measuring cup with 270-350 ml of water and close the safety valve clockwise.
Plug the device into a wall socket.
Pre-heat the unit for 4 minutes approximately. Unlock the child-safety system and press the
steam-releasing trigger to check whether it works or not.
Install the desired accessory by pressing the accessory securing button.
Assemble the accessory securing button.
Unlock the child-safety system and press the steam-releasing trigger again to start the
cleaning.
Safety
The device has an auto-off protection system against overheating. It has a central system to
keep the steam temperature constantly at 130 ºC, in order to kill all the bacteria at the same
time. It includes an automatic pressure releasing function so when the pressure inside the tank
is too high, it will automatically be released. It also has a double-layer cord which will prevent
the product from water and dust.

5. CLEANING AND MAINTENANCE

Disconnect the appliance from the power supply and allow it to cool down before cleaning.
Use a soft, damp cloth to clean the product's parts.
Do not use solvents or any other chemical product for cleaning it.
Do not immerse the appliance in water or other liquid and make sure no water gets into the
machine.
Do not use abrasive scouring pads, powders or cleaners.
If anything unusual happens during use of the item, turn the device off. Pull the plug from the
power source and check the device thoroughly. Maintenance and repairs must be carried out
by a qualified technician from Cecotec.
HYDROSTEAM 1040 ACTIVE&SOAP
32
Use only parts and components provided with the original product by Cecotec.
Store the machine, the instructions manual and the accessories in the original packaging. This
way you can always have all the information at hand.
Store the device and all accessories in a dry, clean, frost-free place that is protected from
direct sunlight and cannot be accessed by children or animals. Do not place the device near a
heat source.
6. TROUBLESHOOTING
Problem
1. Less steam / no steam
2. Steam-releasing trigger can't be pressed
3. Device expels water
Possible cause
1.1. It is not connected to a wall socket
1.2. Not enough water inside
1.3. The steam nozzle is plugged incorrectly
2. The child-safety lock is activated
3.1. Contains too much water
3.2. The device is too tilted
Solution
1.1. Plug the device into a wall socket
1.2. Refill it with water
1.3. Disassemble the nozzle and clean it
2. Unlock the child-safety system and press the steam-releasing trigger at the same time
3.1. Reduce the amount of water to 270-350 ml
3.2. Do not tilt the appliance too much (less than a 30 º angle)

7. TECHNICAL SPECIFICATIONS

Product reference: 05516
Product: HydroSteam 1040 Active & Soap
1100 W, 220-24o V~, 50/60 Hz.
IPX4
ENGLISH
HYDROSTEAM 1040 ACTIVE&SOAP
33