Cleaning And Maintenance - cecotec FAST&FURIOUS 4040 ABSOLUTE Manual De Instrucciones

ENGLISH
Make sure a third part of water inside the tank is over the max. mark.
Make sure the maximum level mark is not exceeded.
Reassemble the water tank in its position.
Hold the handle of the device with one hand and install the additional cloth brush or bristle
brush on the steamer head with the other hand. When installed in the correct position, it will
make a sound.
Connect the device to the power socket and turn it on. The indicator light under the lamp shade
will blink once and return to the standby icon, red light. Press the power button, the indicator
light will start blinking and the device will start preheating. The indicator light will stop blinking
and turn steady on when the preheating process is completed. The device is ready to be used.
Press the power switch, the product will start producing steam.
Release the button, the product will stop producing steam.
Press the power switch to switch from standby mode to low steam, and from low steam to
high steam.
Automatic shut-off function
When the user stops using the product for more than a certain period of time, the internal
control circuit of the product will cut off the power supply and enter automatic shut-off mode.
When this happens, the standby indicator light will blink.
Empty tank protection function
This product has a protection function that activates when there is no water in the tank in order
to protect the pump and prevent the pump from dry pumping. This way, the pump's service life
will be extended and ensured. When the water level in the tank is lower than the minimum
mark and the pump cannot draw water, the pump will automatically stop running within 30-50
seconds and the yellow indicator light corresponding to the empty tank icon will turn on.
Using the garment steamer
Note: The device is designed to be used on clothes hung vertically.
Check whether the back of the cloth is breathable, so as to avoid steam gathering on the cloth
and wetting clothes.
Check the pockets to make sure they are empty.
Check the back of the clothes for objects easily damaged by steam.
Recommendation: Do not use the device around metal parts of clothes, high-temperature
steam could cause the metal parts to fade.
When the steam button is pressed, the device will slightly vibrate and buzz. This is normal as
part of the operating process.
When steaming, touch material lightly with the fabrics brush or brush attachment and move
up and down to remove creases better. It is important not to touch the garment and/or fabric
with the device when the accessories are not assembled.
If the brush accessories are not used on the device, please keep at least 5-cm distance between
30 FAST&FURIOUS 4040 ABSOLUTE
the steam head and the cloth.
Note: If the garment steamer's operating sound becomes louder and no steam is ejected, this
indicates there is no water in the tank. Please, check the water tank.
Release the steam button to stop the steam.
Tips
It is suggested to iron or steam clothes on its inner side.
Trousers may be ironed or steamed holding them by the ends.
The garment steamer does not eliminate stains.
Do not steam clothes while worn.
The garment steamer can be used almost on any type of fabric: Silk, jeans, cotton, polyester,
wool, etc.
Always check if the garment to be steamed has a label with instructions for ironing, and if it
has, follow the instructions.
When taking it for traveling, do not carry the unit base, only carry the main body for easier
storage.
After use
When you have finished using the device, keep power turned on and heat for about 15 seconds,
until there is no steam.
Press the power switch to turn the device off or disconnect the power cord from the power
supply.
Allow the iron to cool down completely. Be careful not to burn yourself! Remove the tank, open
the tank inlet cover and empty the remaining water in the tank.
Place it vertically on a flat surface and wait for the product to cool before storing it.
Fig. 2
1. ON/OFF
2. Empty water tank warning
3. Low steam level
4. High steam level

4. CLEANING AND MAINTENANCE

Turn off, unplug the appliance from the power supply, empty the water tank (do it after each
use) and allow it to cool down completely.
Using distilled or de-mineralized water will reduce the need to clean your steamer and will
prolong its life. However, ordinary tap water may be used as well.
Additives such as cleaning agents, detergents, salt, perfumes and dyes should never be added
to the water tank.
ENGLISH
FAST&FURIOUS 4040 ABSOLUTE 31