Tabla de contenido
Idiomas disponibles
Idiomas disponibles
METHODS FOR SETTING
Setting mode: Press a key for more than 3s, the nixie
tube will start to twinkle and the system will enter into
debug mode. Release the key and then press the key
again, figures of nixie tube will change one digit each
time until digits shown on the nixie tube match the digits
corresponding to the mode the user' request. Wait until
the nixie tube stop twinkling or press the key again for
more than 3s to finish the setting process.
SAFETY SUGGESTIONS
1. When connecting 24V system, terminal voltage of
battery panel may surpass the human body safety
voltage. If operations are needed, insulating tools should
be used and hands must be dry.
2. If storage battery is connected in reverse, the
controller would not be damaged. However, there may
be output of negative voltage at the load end which may
damage your load equipments. Pay attention to avoid
such things.
3.In 24V system, if one end of storage battery or solar
battery panel is connected in reverse, controller may very
likely be damaged.
4. There is a great deal of power stored in the storage
battery. Therefore, short circuit of storage battery must
not happen in any case. We suggest tandem connection
of fuses on storage battery.
5. Storage battery may generate combustible gas and
therefore should be far away from sparks.
6. Please make sure that children are far away from the
storage battery and the controller.
Tabla de contenido
