Krups PERFECTO XP4200 Manual De Instrucciones página 12

KR_ESPRESSO_PERFECTO_XP4200_NC00027827-01 06/12/11 16:20 Page14
English
B. Descaling the steam function
■ Next place the container under the steam nozzle.
■ Turn the selector d1 to the position
be higher than that required for coffee).
■ the LED of the ON/OFF button flashes then remains lit.
■ Turn the selector d1 to the position
the rest of the mixture flow for 2 minutes.
■ During the operation, it is normal for the water temperature light to light up and then go out.
■ After a few moments, stop the appliance (position
■ When the selector d1 is in the position
down phase, the LED of the ON/OFF button flashes and hot water runs into the drip tray.
C. Rinsing
IMPORTANT!
After descaling, rinse 2-3 times with clear water (without ground coffee), as
described in paragraph "First use".
Don't forget to rinse the steam nozzle (Figs. 20 a, b). The appliance is descaled
and ready to use again.
9. GUARANTEE
Your appliance is supplied with a guarantee but any incorrect connection, handling or use other than those
described in the instructions will invalidate this guarantee.
The warranty for this appliance covers it exclusively for domestic use; any other type of use voids the
warranty.
No repairs due to scale are covered by the guarantee.
For any after sales or spare parts problems, contact your dealer or an approved service centre.
14
(steam heat) (fig. 16) (to obtain steam, the temperature must
(steam extraction) (fig. 17): the steam pours into the liquid. Let
).
, the appliance cools down automatically. During the cooling