Guarantee And Service - Philips FC6152/81 Manual De Instrucciones

Ocultar thumbs Ver también para FC6152/81:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 6
Recycling
Do not throw away the appliance with the normal household waste at the end of its life, but hand it
in at an official collection point for recycling. By doing this, you help to preserve the environment.

Guarantee and service

If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
Troubleshooting
1
The appliance does not work
-
The batteries may be low. Recharge the batteries.
2
The charging light does not go on.
-
You may not have put the adapter in the wall socket properly. Put the adapter in the wall socket
properly.
-
Make sure that the appliance plug is inserted into the appliance properly and that the appliance
is switched off.
-
You may not have placed the appliance on the charger properly. Place the appliance on the
charger properly and make sure that the charging light goes on.
-
The contact points on the appliance and/or on the charger may be dirty. Wipe them clean with
a dry cloth.
-
The appliance may have been switched on while it was on the charger. Make sure that the
appliance is switched off when you charge it.
3
The vacuum cleaner does not vacuum properly.
-
The dust compartment may not be attached to the appliance properly. Attach the dust
compartment to the appliance properly.
-
The dust compartment may be full. Empty the dust compartment.
-
The filter unit in the dust compartment may be clogged. Clean both parts of the filter unit.
4
Dust escapes from the vacuum cleaner.
-
The dust compartment may be full. Empty the dust compartment.
-
The dust compartment may not be attached to the appliance properly. Attach the dust
compartment to the appliance properly.
-
Perhaps the filter unit is not placed in the dust compartment properly. Place the filter unit in the
dust compartment properly.
5
The vacuum cleaner does not work properly when one of the attachments is attached to
the nozzle.
-
Check if the attachment is blocked. If this is the case, remove the obstruction.
-
The dust compartment may be full. Empty the dust compartment.
-
The filter unit may be clogged. Clean both parts of the filter unit.
6
The appliance produces a lot of noise.
-
There may be solid particles in the dust compartment. Empty the dust compartment.
ENGLISH
5
Tabla de contenido
loading

Tabla de contenido