Idiomas disponibles
Idiomas disponibles
Connecting the Wireless Mic
After connecting the DJI Pocket 2 with the Do-
It-All Handle, swipe down on the touchscreen of
DJI Pocket 2. Swipe left to find the Wireless Mic
icon
and tap to enable linking with the Do-
It-All Handle. Power on the Wireless Mic and
press the linking button.
If linking is successful, the Wireless Mic icon will turn to .
The next time the Wireless Mic is powered on, it will automatically link with
the device it was last connected to.
If users wish to switch to another wireless mic when there is already a
wireless mic connected, they can choose any of the following methods:
1. Power off the connected mic and refer to the Connection section to link
and connect to other mics.
2. Tap the Wireless Mic icon on the touchscreen of DJI Pocket 2. Tap
Disconnect on the prompt to disconnect the mic from DJI Pocket 2. Refer
to the Connection section to link and connect to other mics.
Charging the Wireless Mic
To charge the Wireless Mic, connect a USB adapter (not included) to the
charging port using the provided charging cable.
Charging time: approx. 60 minutes* (when using a USB adapter of 5 V/0.4 A).
* Charging time was tested in a lab environment at room temperatures of 77° F (25° C),
and should be used for reference only.
Using the Wireless Mic
When the Wireless Mic connects with DJI Pocket 2 via the Do-It-All Handle,
it transmits audio signals to DJI Pocket 2 immediately. When using the
Wireless Mic, the icon will dynamically display the volume bar .
Press the linking button to shoot or record.
The clamp of the Wireless Mic can be attached to clothing or the cold shoe of
a camera.
The 3.5mm port can also be used to connect with a TRS or TRRS wired
microphone.
The microphone windscreen can reduce wind noise effectively.
It can connect to an external power source for charging via the USB-C
port.
Power on the
mic and short
press the button
until the green
LED starts
blinking
5
