If the freezer side is lower:
• Insert a flathead screwdriver into the height
leveler located at the bottom back of the freezer
door and turn it in the direction of the arrow
until it is level.
If the refrigerator side is lower:
• Insert a flathead screwdriver into the height
leveler located at the bottom back of the
refrigerator door and turn in the direction of the
arrow until it is level.
• Raise the front of the refrigerator so that
the doors close by themselves.
Adjusting the levelers so that the back
of the refrigerator is much higher than
the front of the refrigerator can make it
difficult to open the doors.
• If the back of the refrigerator is not level,
support the bottom with an appropriately sized
object and secure the object in place using
tape.
Slide the refrigerator into its spot and then
adjust the level.
• When pushing the refrigerator in, be careful not
to damage the floor.
DA68-03015D-10.indb 22
HOW TO ADJUST THE DOOR
HEIGHT
If refrigerator door is lower than the other:
• The door height levels can be adjusted using
the adjustment nut located at the bottom of
refrigerator door.
• Raising the door too high can cause the door to
interfere with the hinge cover when it is opened
or closed.
1. Open the door that needs to be adjusted and
loosen the clamping nut ( A ) at the bottom of
the door by turning it in the clockwise direction
(
) using the spanner included in the
product package.
( A )
English - 22
( B )
( A )
2017. 7. 7.
2:18