Tabla de contenido
Idiomas disponibles
Idiomas disponibles
The Gladiator
Garageworks Large Mobile GearBox is designed to either roll on casters or be mounted on a wall. See "Accessories" to
®
order a Mounting Bracket kit.
IMPORTANT: If you decide to mount the cabinet on Gladiator GearWall
casters.
3.
To install casters
F14 Hex head bolt (16)
P1
P2
P1
A
A. Rigid casters
B. Swivel casters
IMPORTANT: Install the casters on the cabinet bottom with the
two rigid casters on the front of the cabinet and the two swivel
casters on the rear of the cabinet. With the brake toward the
inside of the cabinet, align the holes in a rigid caster mounting
plate with the holes in a mounting box at the front side of the
cabinet bottom.
NOTE: The holes in the caster mounting plates will align only with
the intended holes in the cabinet bottom to ensure the correct
placement of the casters. Using four hex head bolts, attach the
caster to the cabinet. Repeat steps 1 and 2 for the remaining
three casters making sure to install the other rigid caster on the
front and both swivel casters on the rear. Tighten all the hex
head bolts. Lock the front casters, and stand the cabinet upright.
NOTE: Locking the casters will help keep the cabinet from
moving while it is being lifted. Unlock the front casters and move
cabinet to desired location.
NOTE: To keep the cabinet from rolling, lock the casters.
Install Casters
F14
P3
C
C. Caster mounting box
®
panels or GearTrack
B
®
channels, you do not need to install
5
Tabla de contenido
