How to use
①
If suction power decreases after cleaning the dust tank
clean the air filter and the motor safety filter.
The air filter and the motor safety filter are located on
the top of the vacuum cleaner as above the figure.
① Open the vacuum cleaner cover by pulling the
button.
② Grasp the handle of the dust separator and take
out it.
③ Open the guide cover by pulling the guide cover
lever and remove the dust.
④ Open the air filter cover by pushing the air filter
cover lever and take out the air filter.
⑤ Separate the Air filter & Motor safety filter from the
dust separate.
⑥ Wash the air filter and the motor safety filter.
Do not wash filters with hot water.
⑦ Dry fully in shade so that moisture is entirely
removed.
The air filter and the motor safety filter should be
cleaned as above the figure.
14
Cleaning air filter and motor safety filter
Dust separator
②
⑦
③
Guide cover
Guide cover lever
WARNING
Dry fully for more than 24 hours in shade.
NOTICE
If filters are damaged, do not use them.
In this cases, contact LG Electronics
Servic Agent. Wash filters at least every
1 months.
④
Air Filter Cover
Air Filter Cover Lever
⑥
Air filter
Motor safety filter
⑤
Capítulos
