Technical Data; Noise/Vibration Information; Declaration Of Conformity - Bosch PSB 14,4 V-i Manual Original

OBJ_DOKU-227-002.fm Page 17 Tuesday, August 7, 2007 10:42 AM

Technical Data

Cordless Impact Drill
Article number
Rated voltage
No-load speed
Impact rate
Rated torque
Spindle collar dia.
Max. drilling dia.
– Concrete
– Brickwork
– Steel
– Wood
Max. screw dia.
Chuck clamping range
Drill spindle thread
Weight according to
EPTA-Procedure
01/2003
– with NiCd battery
– with NiMH battery
Please observe the article number on the type plate of your ma-
chine. The trade names of the individual machines may vary.

Noise/Vibration Information

Measured values determined
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 96 dB(A); Sound
power level 107 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
2
a = 4.6 m/s , Uncertainty K = 1.5 m/s
h
Impact drilling into concrete: Vibration emission
2
value a = 23.3 m/s , Uncertainty K =1.5 m/s
h
Screwdriving: Vibration emission value
2
a < 2.5 m/s , Uncertainty K = 1.5 m/s
h
Bosch Power Tools
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
PSB 14,4 V-i
may be used to compare one tool with another. It
0 603 913 4..
may be used for a preliminary assessment of ex-
posure.
V= 14.4
The declared vibration emission level represents
0 – 2100
rpm
the main applications of the tool. However if the
rpm 23100 tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
Nm 5.4
tion emission may differ. This may significantly
mm 43
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
mm 10
tion should also take into account the times
mm 10
when the tool is switched off or when it is run-
mm 10
ning but not actually doing the job. This may sig-
mm 20
nificantly reduce the exposure level over the total
mm 5
working period.
mm 1.5 – 10
Identify additional safety measures to protect the
operator from the effects of vibration such as:
1/2"
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.

Declaration of Conformity

kg 2.2
We declare under our sole responsibility that the
kg 2.3
product described under "Technical Data" is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
according to
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
2
,
2
,
09.07.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
2
.
English | 17
Dr. Eckerhard Strötgen
Head of Product
Certification
1 609 929 M27 | (7.8.07)