Items Supplied - Silvercrest STVM 15 A1 Instrucciones De Servicio

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 72
DANGER! Risk of electric
shock
Do not use the device if the device or
the mains power cable has any visible
damage, or if the device has previously
been dropped.
Only connect the mains plug to a prop-
erly installed and easily accessible wall
socket whose voltage corresponds to
the specifications on the rating plate.
The wall socket must still be easily ac-
cessible after the device is plugged in.
Ensure that the mains power cable can-
not be damaged by sharp edges or hot
points.
When using the device, ensure that the
mains power cable cannot be trapped
or crushed.
The device is not fully disconnected from
the power supply, even after it is
switched off. In order to fully disconnect
it, pull out the mains plug.
When removing the mains plug from the
wall socket, always pull on the plug and
never the cable.
Pull the mains plug out of the wall sock-
et, ...
... if there is a fault,
... when you are not using the device,
... before you clean the device and
... during thunderstorms.
To avoid any risk, do not make modifi-
cations to the product.
When using an extension cable, this
must correspond to the applicable safe-
ty regulations.
WARNING! Risk of material
damage
Never place the device on hot surfaces
(e.g. hot plates) or near to heat sources
or open fire.
Do not clean using sharp objects or
abrasive cleaning agents.
The device is fitted with non-slip plastic
feet. As furniture is coated with a wide ar-
ray of varnishes and synthetics, and is
also treated with different care products,
it cannot be fully ruled out that some of
these materials contain components that
could attack and soften the non-slip plas-
tic feet. If necessary, place a non-slip mat
under the device.
DANGER from rotating
parts
Do not hold any objects in the air inlet
and outlet openings. Keep long hair
and loose clothing away from the rotat-
ing parts.

4. Items supplied

1 mini tower fan
1 copy of the user instructions
Unpacking
1. Remove all parts from the packaging.
2. Check that all parts are present and in-
tact.
15
GB
Tabla de contenido
loading

Tabla de contenido