Tabla de contenido
Idiomas disponibles
Idiomas disponibles
• Switch toaster to the OFF position, allow the toaster to cool
completely and unplug.
CAUTION: DO NOT ATTEMPT TO CLEAR THE JAM
UNTIL THE TOASTER HAS COOLED THOROUGHLY.
• To clear jam, remove reflector/crumb tray and, using a long
object, preferably made of wood, dislodge object causing jam.
Cleaning Instructions
• CAUTION: Switch toaster off, wait for READY/HOT switch to
turn off, then unplug. Do not touch hot surfaces until the unit
has cooled.
• IMPORTANT: Do not clean your conveyor toaster using
abrasive cleaners or pads. This will scratch and dull the
surface of your unit.
• CAUTION: Do not spray, rinse or submerge the toaster
in any liquid. Excessive moisture in the unit will cause a
severe electrical hazard and may otherwise damage
the toaster.
• Wipe the exterior of the toaster with a damp sponge or cloth
soaked in hot or warm detergent water. Wipe with a clean,
damp cloth to remove excess detergent and then wipe to dry
the toaster.
• Remove the reflector/crumb tray, toast drawer and wire bread
feeder from the unit and empty them. Wash them in warm
detergent water and rinse them. Dry tray, drawer and rack
thoroughly.
10
Tabla de contenido
